Tracks and track covers made of zinc-caoated steel
Zinc-caoated shaft, diameter 130 mm
Guide rails — extruded polyethylene
Door curtain — nontransparent reinforced PVC with density of 900–1 200 g/sqm
Control unit — painted steel body 300 х 400 х 150 mm; protection class — IP54; with frequency converter
Photocells are installed at 500 mm above the floor level. Anti-jamming sensor — at the top of side track to detect incorrect unwinding of the curtain
Tracks and track covers made of AISI304 stainless steel
Control unit body made of AISI304 stainless steel
Heating of the drive and tracks
If the sensitive lower edge touches an obstruction when the door is closing, then a signal is transmitted to the control unit to open the door. In case of power outage the door opens automaticaly with a counterweight.
General view of a door with a drive from the side (drive on the left/drive on the right) without a heating system.
| Symbol, parameter name | Calculation formula |
|---|---|
| H, mm Opening height | 2,000–3,750 |
| B, mm Opening width | 2,000–3,000 |
General view of a gate with a side drive (drive on the left/drive on the right) with a heating system.
| Symbol, parameter name | Calculation formula |
|---|---|
| H, mm Opening height | 2,000–3,750 |
| B, mm Opening width | 2,000–3,000 |
| Parameter | Value | Notes |
|---|---|---|
| Wind load, Pa | CLASS2 | For gates up to 3,500 mm wide |
| Opening speed, m/s | 1.0 | For gates up to 3,000 × 3,000 mm |
| Closing speed, m/s | 0,8 | |
| Operating temperature range, °С | -30...+50 | When operating in temperatures of -16...-30 °C, the gate design does not have reinforcement on the leaf, and transparent sections cannot be installed. The Security Profile option is not available. |
| Power, W | 1 500 | |
| IP protection class | 54 | End positions are tracked by encoder |
| Supply voltage, V | 220 V / 50 Hz | Single phase |
| Supply voltage, V | 380 V / 50 Hz | Three-phase |
| Number of cycles | 1,500,000 | Depends on operating conditions |
Wind load resistance for SpeedRoll series doors is given for the door in the closed position. Gates are not used in places with unstable and increased wind loads caused by natural or man-made factors, such as: buildings located on sea coasts or in the mountains; multi-level heated underground parking lots with multiple entrances and exits; production facilities with powerful supply and exhaust ventilation; in buildings of complex configuration with many gate openings, where strong drafts may occur. If one or more of the above factors are present, it is recommended to use a SpeedFold series door or a HSSD series spiral door.
To ensure reliable and uninterrupted operation of the gate, it is recommended to carry out regular technical inspection and maintenance.
Manual opening and closing of the gate is done using a crank.
Do not subject the gate to impacts or interfere with its free opening and closing.
Do not allow the PVC sheet guide to get dirty.
It is prohibited to stand in the opening while the gate is opening and closing to avoid injury.
Make sure that there are no foreign objects in the opening when opening and closing the gate.
| Packing in wood | Packaging features |
|---|---|
| Description | The packaging is a wooden box made of timber, cardboard is laid between the nodes, everything is secured with clamps |
| Length, mm | Depends on the length of the gate components |
| Width, mm | 700 |
| Height, mm | 665 |
The DoorHan concern loads gates onto trucks using a hydraulic crane or forklift with a fork of at least 2 m. The buyer or installer must provide the same equipment for moving the packaged gates. The plug must fit under the wooden tray provided by the manufacturer and protrude from the other side. When using a crane or other lifting equipment, it is recommended that you use slings of adequate lifting capacity.
High-speed roll-up door of SpeedRoll SDC series (for cold rooms)
GFA control unit
BMP control unit
DoorHan control unit
Certificate of Conformity (high-speed roll-up door)
Technical data for high-speed roll-up door
The buyer is provided with a performance guarantee for high-speed roller doors produced by the DoorHan concern for a period of 1 year for retail and for a period of 2 years for dealer orders from the date of purchase.
DoorHan SERVO drive (220 V).
Tracks and track covers made of zinc-caoated steel
Zinc-caoated shaft, diameter 130 mm
Guide rails — extruded polyethylene
Door curtain — nontransparent reinforced PVC with density of 900–1 200 g/sqm
Control unit — painted steel body 300 х 400 х 150 mm; protection class — IP54; with frequency converter
Photocells are installed at 500 mm above the floor level. Anti-jamming sensor — at the top of side track to detect incorrect unwinding of the curtain
Tracks and track covers made of AISI304 stainless steel
Control unit body made of AISI304 stainless steel
Heating of the drive and tracks
If the sensitive lower edge touches an obstruction when the door is closing, then a signal is transmitted to the control unit to open the door. In case of power outage the door opens automaticaly with a counterweight.
General view of a door with a drive from the side (drive on the left/drive on the right) without a heating system.
| Symbol, parameter name | Calculation formula |
|---|---|
| H, mm Opening height | 2,000–3,750 |
| B, mm Opening width | 2,000–3,000 |
General view of a gate with a side drive (drive on the left/drive on the right) with a heating system.
| Symbol, parameter name | Calculation formula |
|---|---|
| H, mm Opening height | 2,000–3,750 |
| B, mm Opening width | 2,000–3,000 |
| Parameter | Value | Notes |
|---|---|---|
| Wind load, Pa | CLASS2 | For gates up to 3,500 mm wide |
| Opening speed, m/s | 1.0 | For gates up to 3,000 × 3,000 mm |
| Closing speed, m/s | 0,8 | |
| Operating temperature range, °С | -30...+50 | When operating in temperatures of -16...-30 °C, the gate design does not have reinforcement on the leaf, and transparent sections cannot be installed. The Security Profile option is not available. |
| Power, W | 1 500 | |
| IP protection class | 54 | End positions are tracked by encoder |
| Supply voltage, V | 220 V / 50 Hz | Single phase |
| Supply voltage, V | 380 V / 50 Hz | Three-phase |
| Number of cycles | 1,500,000 | Depends on operating conditions |
Wind load resistance for SpeedRoll series doors is given for the door in the closed position. Gates are not used in places with unstable and increased wind loads caused by natural or man-made factors, such as: buildings located on sea coasts or in the mountains; multi-level heated underground parking lots with multiple entrances and exits; production facilities with powerful supply and exhaust ventilation; in buildings of complex configuration with many gate openings, where strong drafts may occur. If one or more of the above factors are present, it is recommended to use a SpeedFold series door or a HSSD series spiral door.
To ensure reliable and uninterrupted operation of the gate, it is recommended to carry out regular technical inspection and maintenance.
Manual opening and closing of the gate is done using a crank.
Do not subject the gate to impacts or interfere with its free opening and closing.
Do not allow the PVC sheet guide to get dirty.
It is prohibited to stand in the opening while the gate is opening and closing to avoid injury.
Make sure that there are no foreign objects in the opening when opening and closing the gate.
| Packing in wood | Packaging features |
|---|---|
| Description | The packaging is a wooden box made of timber, cardboard is laid between the nodes, everything is secured with clamps |
| Length, mm | Depends on the length of the gate components |
| Width, mm | 700 |
| Height, mm | 665 |
The DoorHan concern loads gates onto trucks using a hydraulic crane or forklift with a fork of at least 2 m. The buyer or installer must provide the same equipment for moving the packaged gates. The plug must fit under the wooden tray provided by the manufacturer and protrude from the other side. When using a crane or other lifting equipment, it is recommended that you use slings of adequate lifting capacity.
The buyer is provided with a performance guarantee for high-speed roller doors produced by the DoorHan concern for a period of 1 year for retail and for a period of 2 years for dealer orders from the date of purchase.
