SECTIONAL-800PRO and SECTIONAL-1000PRO drives for domestic sectional doors

The SECTIONAL-800PRO electromechanical chain drive is designed for automation of domestic sectional doors with low and standard lift types and door leaf weight up to 150 kg, and SECTIONAL-1000PRO is designed for automation of gates with door leaf weight up to 180 kg.

Application:

Sectional garage doors with low and standard lift types
Domestic sectional doors with low and standard lift types

Order with installation

Advantages

Safe operation of the drive is achieved through the force protection function and the ability to connect photocells.

The drive has an LED lighting system that saves energy.

Possibility to control the built-in LED lamp using the remote control to illuminate the room.

Automatic gate closing function with programmable delay time.

It is installed on the guide using two U-shaped brackets and does not require additional structures or brackets for installation.

Safe operation of the drive is achieved through the force protection function and the ability to connect photocells.

The drive has an LED lighting system that saves energy.

Possibility to control the built-in LED lamp using the remote control to illuminate the room.

Automatic gate closing function with programmable delay time.

It is installed on the guide using two U-shaped brackets and does not require additional structures or brackets for installation.

Design

Drive design

Impact-resistant ABS-plastic

Metal logo

Ceiling light

Equipment

Standard

Optional

Drive, curved rod, TRANSMITTER 2-PRO-BLACK remote control, set of brackets, set of hardware, operating instructions.

Safety photocells PHOTOCELL-N, consisting of an infrared transmitter and receiver.

WI-FI module for wireless control (generation of a control signal, NO) of electric drives.

GSM module for receiving a signal from a mobile phone and transmitting a control command to start an electric drive or barrier.

Remote control TRANSMITTER 2-PRO-BLACK for remote control of two automatic devices.

CAR-TRANSMITTER remote control via cigarette lighter can operate two devices

COMMAND-433 wireless button to control two devices

KEYPAD series code keypad controls door operator equipped with internal or external DoorHan receiver

Turning off KEYSWITCH-N transmits a controlling signal to the control block of an automatic device

External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control

SK-series chain rail (PK-series belt rail optional)

External release mechanism LOCK used to open sectional doors in case of blackout if there is no pass door or another alternative entrance into the garage

External release mechanism LOCK-N used to open sectional doors in case of blackout if there is no pass door or another alternative entrance into the garage

External release mechanism LOCK-MINI used to open sectional doors in case of blackout if there is no pass door or another alternative entrance into the garage

Technical description

Size Table

Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Door area, sqm

Display cover
Housing cover
LED lamp
Display
Geared motor
Control unit
Body
Terminal plug for connecting accessories
Reference point microswitch
Spline bushing

Parameter	Value	Notes
Supply voltage, V	180–240
Standby mode, W	6
Lifting force, N	800/1 000
Electromotor	Step-by-step (pulse)
Motor, V	24 DC
Door opening speed, m/min	6
Operating temperature range, °С	-20...+55
Safety fuse	Power supply 2,5 A
Drive	Chain/belt
IP protection class	IP 20

1. Before installing the drive, you need to make sure that the gate is balanced and operates smoothly.

2. It is necessary to make sure that the location of operation matches the climatic conditions with the characteristics of the drive.

3. It is prohibited to install the equipment in rooms with the presence of flammable substances or hazardous environments.

4. The maximum force should be no more than 20 kg.

5. It is allowed to use additional accessories only from DoorHan in order to avoid damage to the drive.

6. It is forbidden to leave the electric motor in a disengaged state.

7. Do not use the drive if repairs or adjustments are necessary.

8. Make sure there are no foreign objects in the range of the electric drive before starting it.

9. Passage and passage is permitted only when the gate is stopped and the drive is turned off.

10. Do not allow children to use the drive or accessories.

11. It is prohibited to make changes to the automatic part.

Packing in cardboard box	Packaging features
Description	The packaging is a standard size cardboard box with the manufacturer’s logo
Contents	Cardboard box
Width, mm	190
Height, mm	125
Length, mm	330

Installation

Mounting Options

Installed on the guide using two U-shaped brackets.

Warranty print

The buyer is provided with a guarantee of drive performance for 3 years from the date of purchase. Dealers have the right to change the warranty period.